Room Additions in Haltom City, TX
An addition is the biggest project most homeowners take on, and the one with the most moving parts: survey and setbacks, HOA approval, a foundation tied into the existing slab, a roof that blends into the old one, and HVAC that actually reaches the new room. We plan all of it before the first shovel goes in.
Remodeling in Haltom City
Haltom City has many 1950s and '60s frame and brick homes. Remodels here often start with what's behind the drywall — older wiring, galvanized supply lines, and settled floors.
Pebblegrove Remodeling serves Haltom City (Tarrant County) from our home base in Euless. Every project starts with an in-person walkthrough and a written scope and price before any work begins.
When it's time
- The family has outgrown the bedroom count
- You need a primary suite on the ground floor
- A home office that isn't the dining table
- Moving would cost more than building
What it costs
| Scope | Typical range | Includes |
|---|---|---|
| Room addition, finished | $175–$350 per sq ft | typical bedroom or family room |
| Primary suite addition with bath | $90,000–$200,000+ | bedroom, closet, full bath |
These ranges are for orientation, not a quote. Every house is different; your price is written after we see the work, before anything starts.
Additions with plumbing cost meaningfully more per square foot than dry rooms. Matching brick, tying into a complicated roofline, and extending HVAC are the other big variables; we price each one rather than averaging them away.
How a room additions project runs in Haltom City
Site visit and feasibility
We look at the lot, setbacks, utilities, and roofline to see what will fit and what it will take.
Design and written price
Plans, engineering, and a detailed scope with one price, including permit and HOA steps.
Permits and approvals
We submit to the city and, where applicable, your HOA before construction starts.
Foundation, framing, and dry-in
Slab, framing, roof tie-in, windows, and exterior to match the house, with inspections at each stage.
Systems, finish, and walkthrough
Electrical, HVAC, insulation, drywall, flooring, and paint — then a final walkthrough with you.
Room Additions questions — Haltom City, TX
How much does a room addition cost in Haltom City, TX?
A finished room addition typically runs $175–$350 per square foot in Dallas–Fort Worth, and a primary suite with a bathroom often lands between $90,000 and $200,000 or more. Your price depends on size, plumbing, roofline, and finishes and is written after design.
Do I need a permit and HOA approval for an addition?
A permit, yes — an addition always requires one. HOA approval depends on your neighborhood's deed restrictions. We handle the city submittal and help you prepare the HOA package where one is required.
How long does an addition take?
Design and permitting usually take several weeks. Construction for a typical single-room addition then runs about 3 to 5 months depending on size and inspections.
Can you match our existing brick?
Usually closely, but rarely perfectly — brick lines get discontinued and weathered brick doesn't match new. We'll source the closest available match and show it to you before ordering, or discuss siding or a complementary material where that looks better.